1-4x LPVO | Mustang 1-4x24 FFP .22LR Rifle Scope

Sorry, this scope cannot withstand the impact of 12G slugs

Up to .308.

It can hold .308

Hello
 
#1 Is it possible to help do a “Box Testing? of the adjustment ?
 
(1) Tighten the rifle
(2) Put a paper at 100 yds(MOA) / meters(MIL)
(3) Adjust the elevation turret from the "Up" to "Down" , adjust the windage turret from the “left” to “right”
(4) Record the distance that reticle's movement on the paper
 
#2 If the “Box testing” works well. Please check below 5 tips
 

Are the rings installed too tightly ? (The suggested screws Torque is 15-18 Inch-pounds, Over torqueing the ring screws will cause excess pressure on the tube, which will cause problems when adjusting the reticle/adjustment.)
Has the windage or elevation turret been adjusted to the ultimate position ? For example the most left/right or the most up/down. (Reason : “ windage adjustment ”” elevation adjustment ”, they are both adjusted in the same inner tube of the riflescope which means the windage or elevation adjustment will influence each other )
Would like to know the height of the center of the scope from the barrel (Attached picture for reference)
Is it possible to tell me the distance riflescope used ? what is your bullet drop at such distance ？
Have a try to exchange the position of front ring with back ring.

 
Many times, problems thought to be with the scope are actually mounting problems. Be sure the mounts are properly torqued to the rifle and the scope is secured so it doesn’t twist or move in the rings. An insufficient windage or elevation adjustment range may indicate problems with the base mount, base mount holes drilled in the rifles receiver, or barrel/receiver alignment.

Hi, sorry for the late reply. Yes, we can ship to Taiwan.Please order it directly.