Feature
· Astigmatism-Friendly Green Dot: Provides Clearer Visibility Than Red Dots, Especially Effective Against Bright or Sandy Backgrounds
· Rapid Aim with 5MOA Dot: Large Dot Size Enables Quick Target Acquisition for Fast-Paced Shooting Scenarios
• Lightweight Durability: Weighs Only 18.4g / 0.65oz, Rugged 7075 Aluminum Housing with IP67 Waterproof Endures Harsh Conditions
· Adaptive Brightness Control: 8 Levels + 2 NV Modes with Motion Sensor for Auto On/Off in Any Light
• Wide Caliber Compatibility: 1000G Shockproof Withstands Recoil from 9mm to .338 Lapua Magnum, Built for Pistols, Rifles, and Shotguns
• Direct Slide Fit: MGT Footprint Compatible with RMSc Cut, Perfect for GLOCK Slimline MOS, Canik® TP9, Walther PPS, and Similar Platforms
(Note: The sight does NOT come with a weaver mount base.)
Specification
·Magnification: N/A
·Window Lens Size: 17x24mm / 0.7x0.9in
·Length: 40.9mm / 1.6in
·Width: 26mm / 1.0in
·Height: 24mm / 0.9in
·Weight (net): 18.4g / 0.65oz
·Eye Relief: Free
·Optics Coating: Multi Coated
·Parallax: Free (<2MOA)
·Parallax Setting: 25 yards
·Adjustment Range: >45MOA
·Dot Size: 5MOA Green
·Dot Intensity: 8 Levels & 2 NV
·Footprint: MGT compatible with R.M.S
·Working Temperature: -20~+55C
·Housing Material: 7075-T6 Aluminum Alloy
·Mount Material: 6061-T6 Aluminum Alloy
·Battery Type: CR2032
·Battery Runtime: 40,000 hours (weakest visible dot)
·Finish: Black Matte
·Made of 7075-T6 Aluminum Alloy
·For close-in work and general shooting
·IP67 water proof, shock proof to 1000g
·Package includes: retail package, rubber lens cover, hex keys, screws and cleaning cloth etc
Reticle
Questions & Answers
Have a Question?
-
Which of your Red Dot fit RMS-C footprint i want to use it on a Glock 26 ?
Hello, these red dot fit MAG（Shield RMS/RMSc/RMSxSMS）footprint, Model of SCRD-43,SCRD-F43,SCRD-G43,SCRD-M43,SCRD-52.SCRD-53,SCRD-54,SCRD-55,SCRD-50,SCRD-62,SCRD-49,SCRD-56.
Please confirm mounting plate is needed to install a red dot on Glock 26.
SCRDM-09, GLOCK Mount MAG: https://vector2007.com/products/frenzy-red-dot-pistol-mount-adapter-g17-mag-footprint -
WHAT MOUNT IS NEEDED TO FIT THE DEVICE ON A GLOCK 26 AND GLOCK 40 ?
Hello, SCRD-G43 FRENZY-S 1X17X24 MIC PISTOL GREEN DOT SIGHT 7075 ALU is MAG footprint,which is compatible with Shield RMS/RMSc/RMSxSMS.
Please make sure Glock 26 need a mounting plate or adapter in order to mount this red dot with a footplate SCRDM-09
https://vector2007.com/products/frenzy-red-dot-pistol-mount-adapter-g17-mag-footprint
As for Glock 40, it can be mounted on the GLOCK 40 MOS without requiring a separate adapter or mounting plate.
If you have any questions, please contact us. -
Is this fit for a Canik SFX Rival?
Hi,
Sorry for the late reply.SCRD-G43 is MAG footprint. Please make sure your pistol can be installed.
To know if our red dot sight will fit on your pistol, you need to know the footprint of the mounting system.
1) If your pistol slide has already been cut by default and the pistol comes with several kinds of mount plates, then nearly all our Frenzy red dot will fit on your pistol. Whereas some pistols come with a fixed footprint cut, a certain type of red dot sight can be directly mounted without a plate.
2) With a non-cut pistol slide, you can only swap the iron sight for a mounting plate, which is normally on sale at your local gun shops, onto which a red dot sight is held. To know the type of your mounting plate, you can contact its supplier.
3) Our Frenzy red dot has three sorts of footprints.
TEK footprint is the same as that of Doc, VT, and Burris fire. (We have some TEK plates for a few pistols)
MOJ footprint is the same as RMR.
MAG is the same as RMS/RMSC. -
thous this fit a cz75 ?
Yes, it shares the RMS footprint.
But a mounting plate is needed to install a red dot on CZ75. -
Is this a direct fit for a RMS-c mount that is on my Glock 43x aftermarket slide?
Yes, it shares the RMSC footprint.
-
Se puede instalar en taurus gx4XL toro
Yes, it can be directly mounted on Taurus GX4XL TORO.
-
Is the motion sensor feature both auto on (like the holosun shake awake feature) and auto off?
Yes, the red dot sight turns off automatically after it is kept still for 2 minutes, and when you move it or shake it, it lights up.
There is no need to turn it on and off manually.
