Frenzy Mini Red Dot Sight (SCRD-43/SCRD-M43)

Are mounting screws included that will properly fit a Springfield Hellcat Pro?

Hi,
There are 4 different types of screws coming with this red dot.
M3x0.5
M4x0.7 (total length 9.5mm)
M4x0.7(total length 11mm)
#6-32 UNC

Will this fit Jericho 941F 9mm

You need an adaptor plate to install a red dot on Jericho 941F.
Whether a red dot can be mounted on this pistol depends on the footprint of the plate.

Is it compatible with RIA stk100 ?

No, these Frenzy with TEK footprints will fit STK100.
SCRD-19II    
SCRD-F19II
SCRD-G19II
SCRD-35    
SCRD-40

Hello, what kind of a mount base do I need for Glock 17 Gen 4? In this production (FRENZY-S 1X17X24 MIC RED DOT SIGHT) include a suitable one already ? or I have to buy a mount base separately

You need to buy a plate separately.
Frenzy Red Dot Pistol Mount Adapter G17 MAG Footprint - Vector Optics 2007 (vector2007.com)

hi, this model work ok for a beretta 92 x performance defensive ?

These will work, but please buy a mounting plate to install a red dot.
SCRD-19II/35/40/G19II
Frenzy & Sphinx Red Dot Pistol Mount Base for BERETTA 92 - Vector Optics 2007 (vector2007.com)

Will this fit a Taurus GX4

You need a mounting plate to install a red dot on GX4.
This red dot shares the RMSC footprint.

This onde fica on a G17mos?

Yes

Will this fit my Smith & Wesson 2.0 compact optic ready pistol

Hi,
Frenzy-S shares the RMS footprint.
A mounting plate is needed to put a red dot sight on SW 2.0 optics-ready

Any plans for a green dot in this sight?

Hello, sorry for the late reply. Yes, we have green dot. The item is SCRD-G43
https://vector2007.com/products/frenzy-s-1x17x24-mic-pistol-green-dot-sight-7075-alu-1

Is it compatible with the Sig P320 X-Full?

Hi, sorry for the late reply. The red dot shares the RMSc footprint. It is compatible with Sig Sauer Romeo Zero. Please make sure your pistol needs an adapter or not to be installed.

Will this fit on canik mete?

Yes, same footprint as RMSc fit canik mete

Would this red dot fit on a Sig Sauer P320 X-Carry Legion? Thanks!

Hi, sorry for the late reply. This optics shares RMSc footprint. It is compatible with Sig Sauer Romeo Zero. Please make sure you need an adapter to mount it or not.

Will this fit on top of AR Pistol w/top rail

Hi, Frenzy-S 1x17x24 MIC Red Dot Sight will come with weaver mount. If your AR pistol has a top rail that is compatible with Weaver accessories, then the Frenzy-S should be able to mount onto it.
Please make sure you can mount on it or not.

Will this specific red dot fit a Hellcat pistol? Do you have this model in a low profile? Can you use iron sights with this red dot mounted on my Hellcat?

Hello, Dean.
We have received your message.

First, thanks for your consideration of our brand and products.
As for your question, this red dot can fit your pistol, because it has RMS-c footprint(same as MAG or SHIELD footprint)
And this red dot has the lowest height in our products. The height is 24mm.

Welcome to buy our products.

If you have other questions, welcome to contact us.
Best regards.

Do you have available RMS-c footprint (glock sight base mount) for frenzy-s? I already bought frenzy-s from local distributor here in PH..I need the glock sight base mount for my frenzy-s. I hope you could help me.

Hello， Eja.
We have received your message.

First, thanks for your using our products.
As for your question, we don't have mount base can be compatible with Frenzy-S for Glock for sale.
Please try to confirm if your Glock comes with matched mount base.
Because RMS-C footprint is same as MAG or SHIELD footprint.

We are very sorry for your inconvenience caused by this.
If you have other questions, welcome to contact us.

What is the best sight mount base plate for glock to install the frenzy-s?

Hello, Eja.
We have received your message.

First, thanks for your consideration of our brand and products.
As for your question, this product is “RMS-c” footprint (same as SHIELD or MAG footprint ).
You can choose the mount base plate can fit this footprint.

Welcome to buy our products.

If you have other questions, welcome to contact us.
Best regards.

Would this model best fit my hellcat?

This model is best for your hellcat handgun. It is of good quality and at the same time very lightweight. In other words, it is very suitable for compact handguns.
I learned from the Springfield’s website that your hellcat’s slide fits Shield RMSc red dot. The Frenzy-S 1x17x24 MIC Red Dot Sight has MAG footprint. The MAG and Shield are compatible. And please make sure your hellcat has a cut with a red dot installed.

Motion sensor auto start?

Yes, Motion sensor auto start , but dont manual shutoff sight.

More specifically, will the footprint match any of these common adapter plates: Plate 01 - Eotech / Docter / Insight / Meopta Plate 02 - Trijicon RMR Plate 03 - C-MORE Plate 04 - Leupold Delta Point

SCRD-19II/35/40 Frenzy TEK footprint match Plate 01 - Eotech / Docter / Insight / Meopta
SCRD-36/37 Frenzy-X MOJ footprint match Plate 02 - Trijicon RMR
SCRD-43/49/53/53 Frenzy-S MAG footprint match Plate 05 - Shield RMS

What is the comparable footprint? Is it RMR?

The Frenzy-S 1x17x24 MIC Red Dot Sight's footprint is MAG, which is same as the shield RMSc.

Hello, is it compatible with Glock 19 MOS? Do you need any separate plate?

Hi, sorry for the late reply.
To know if our red dot sight will fit on your pistol, you need to know the footprint of the mounting system.

1) If your pistol slide has already been cut by default and the pistol comes with several kinds of mount plates, then nearly all our Frenzy red dot will fit on your pistol. Whereas some pistols come with a fixed footprint cut, a certain type of red dot sight can be directly mounted without a plate.

2) With a non-cut pistol slide, you can only swap the iron sight for a mounting plate, which is normally on sale at your local gun shops, onto which a red dot sight is held. To know the type of your mounting plate, you can contact its supplier.

3) Our Frenzy red dot has three sorts of footprints.

TEK footprint is the same as that of Doc, VT, and Burris fire. (We have some TEK plates for a few pistols)

MOJ footprint is the same as RMR.

MAG is the same as RMS/RMSC.

Will this fit a Docter Cut like a PSA Dagger?

Hi, no, it is MAG footprint, which it is compatible with RMSc. Please make sure you need an adapter to mount it or not.

Which of the frenzy line will direct mount to a Doctor cut slide?

Hi, the below items of frenzy are fit for Doctor:
SCRD-19II
SCRD-F19II
SCRD-G19II
SCRD-35
SCRD-40

Will the included screws work on a Taurus TX-22 compact?

Hi， sorry for the late reply.
The item of SCRD-M43 will include these types of screws.
M3x0.5
M4x0.7 (total length 9.5mm)
M4x0.7(total length 11mm)
#6-32 UNC
Please ask your pistol store for help.

Do you ship to New Zealand?

Yes, we can ship it to New Zealand.